This beautifully finished unbreakable polished brass diz has three hole sizes - 1.5mm, 3mm, for fine through to coarse wools, and a 5mm for colour blending.
The Majacraft diz is made in brass and has the holes cut with high pressure water. There are no burrs at all so the fibre will never catch and the brass has a low coefficient of friction so the fibre flows smoothly. The holes are very accurate so you can be sure your work will be precise.
The diz acts as a former to make a constant thickness sliver from carded or combed wool, while aligning fibres longitudinally. An essential for worsted spinning, and since it aligns the fibre, can be used to revitalize an old fleece or to blend different wools.
For tutorials on how to use our diz, visit the Resources area of the web site.
Colour blending on a hackle
Blending Colours with Mini Combs
Fusion Engine HOWTO - set the licker position
Fibre art rolags
Fusion Engine Manual (3.2MB - 16/03/2015)
Tutorials - tools
Hackles Up - Combing, colour and fibre blending on a hackle (4.9MB - 19/03/2012)
Using the Majacraft Diz (0.2MB - 26/03/2007)
Colour Blending with the Majacraft Diz (0.4MB - 26/03/2007)
Multicoloured Rovings with the Majacraft Diz (0.3MB - 26/03/2007)
Using the Majacraft Mini Combs (0.2MB - 26/03/2007)
Using the blending board (0.7MB - 15/08/2013)
Making rolags on the blending board (2.7MB - 19/08/2013)